<button id="bhosy"></button>
      <th id="bhosy"><track id="bhosy"></track></th>

        1. <rp id="bhosy"><object id="bhosy"><blockquote id="bhosy"></blockquote></object></rp>
          <tbody id="bhosy"></tbody>
          <rp id="bhosy"></rp>
          <dd id="bhosy"></dd>
            MT1040A 型無心磨床
            MT1040A 型無心磨床

            機床主要特點(Main Characteristics)

              ◆ 機床采用砂輪架固定、導輪架移動布局;
              ◆ 砂輪為懸臂式結構,砂輪主軸采用多片式長軸瓦動壓油膜軸承;
              ◆ 導輪為懸臂式結構,導輪主軸前端采用整體1:30錐體滑動軸承,后端采用高精度滾動軸承;
              ◆ 導輪架進給導軌采用燕尾形滾針導軌,進給用差動絲桿;
              ◆ 導輪架調速采用交流變頻調速;
              ◆ 機床配備切入機構;
              ◆ 托架安裝面采用T型槽定位。
              ◆ The layout of the machine is thst its grinding wheethead is fixed and regulating wheelhead is movable.
              ◆ The grinding wheel spindle is designed in cantilever structure and supported on multiple long-secment hydrodynamic oil-film bearing.
              ◆ The regulating wheel spindle is also designed in cantilever structure and supported on conlcal sliding bearing with 1:30 taper in the front and rolling bearing on the back.
              ◆ The regulating wheel feed slide is supported on dovetail needle roller guideway and a differential leadscrew is  used for performing feed motion.
              ◆ AC frequency converter is used ofr changing the regulating wheel speed infinitely.
              ◆ The machine is equipped with the plunge-cut mechanism.
              ◆ The mounting surface of the workrest is located with T-slot.

                        

            主要用途及適用范圍(Main Appllcatlon)

              主要用來對各種圈類、軸類零件的圓柱面進行通磨。對各種階梯、錐形和圓形旋轉面進行半自動切入磨削。
              The machine is mainly used for through-feed grinding of cylindrical surface of ring-and shat-type parts,as well as for plunge-cut grinding of various stepped,conical and cylindrical surfaces semi-automatically.

            地基安裝圖

            磨削精度
            圓度 Roundness 0.002mm
            圓柱度 Cylindricity 0.003mm
               

            主要規格與參數

            磨削直徑
            ( 備注:采用特殊托架最小工件直徑為0.6mm )
            通磨
            For throughfeed grinding
            切入磨
            For infeed grinding
            Φ2-Φ40 Φ7-Φ40
            最大磨削長度
            Maximum grinding length with standard work rest
            通磨
            For through feed grinding
            切入磨
            For infeed grinding
            140mm 120mm
            磨削輪規格
            Grinding wheel spadifications
            PSA350x125x127mm
            導輪規格
            Regulating wheel specifications
            PSA250x125x75mm
            磨削輪轉速
            Grinding wheel speed
            1870r/rain
            導輪轉速
            Reguiating wheel speed
            10-180r/min.(stepless)
            導輪回轉角度 垂直面內
            Swivellng angle of regulating wheel ln vertical plane
            -2°~+4°
            水平面內
            In horizonfal plane
            0°~+3°
            進給手輪每格進給量
            Feed amount per division of the feed handwheel
            0.002mm
            修整器每格進給量
            Feed amount per division of the dresser
            0.01mm
            砂輪中心連線至托架底面距離
            Helght of the centerlines of two wheels to the bottom of workrest
            190mm
            砂輪中心連線至地面距離
            Height of the centerlines of two wheels to the floor
            985mm
            機床電機總功率
            Power of motors
            9kw
            磨削輪電機總功率
            Grinding wheel motor
            7.5kw
            機床使用電源
            Power supply
            3N-50Hz 380V
            機床外形尺寸(長X寬X高)
            Overall dimensions(Lx Wx H)
            1550x1300x1400mm
            機床重量
            Machine weight(Approx.)
            2000kg
            版權所有 無錫東潤機床制造有限公司_無心磨床 Copyright © 2018 www.3328777.com All Rights Reserved.